Links

• Minstry of Oil
• National Oil Corporation(NOC)

• 

  Name of program:Advanced Process Operations.

  Course Code:

  o IAPO-12
  o RAPO-12

  Method:

  o Theoretical: Classroom
  o Practical: DCS Process Simulator.

  Duration:

  o Reg.: 4 WKS
  o Intensive: 3 WK.

  Capacity: 6 to 8 Trainees.

  Location: PTQI Process Department.

  Frequency: As per attached schedule.

  Faculty: PTQI Process Department Staff.

• For whom appropriate:

  Technicians requiring practical experience of Advanced process operations and dealing with critical situations from a centralized control room environment..

• Purpose of program:

  To provide, by means of practical exercises using dynamic high fidelity process simulation, practical experience of dealing with process upsets, problems, trips and other process emergency and critical situations of operation from a centralized control room environment.

• Content outline:

  • - Distributed control systems operation.
  • - Oil and gas field processes.
  • - Process start-up and shut-down from cold conditions.
  • - Process start-up and shut-down from a trip condition.
  • - Alarm handling.
  • - Emergency shut-down systems.
  • - Emergency shut-down system logic and operation.
  • - Handling trips and using overrides.
  • - Production wells system operation:
  o Oil wells
  o Production and test Manifolds
  • - Oil and gas separation system operation:
  o Test separator.
  o HP separator.
  o MP separator.
  o Crude oil heater.
  o LP separator.
  o Coalescer unit.
  o Oil booster pumps.
  o Oil export.
  o Oil storage.
  o Produced water system.
  o Water injection system with 3 injection.
  o wells.
  o Flare system.
  o Fuel gas system……………………..Cont.
  o Sea water system.
  o Steam generation.
  o Closed drain system.
  o Heating and cooling medium system.
  o Power generation and distribution.
  o Emergency shutdown system ESD/PSD.
  • - Gas Production System operation:
  o Gas recompression.
  o Gas dehydration system.
  o TEG Regeneration system.
  o Gas export system.
  o Gas re-injection compressor.
  • - Gas re-injection wells

  Introduction to DCS >>
  Basic Process Control >>

• For any further information please do not hesitate to Drop by or call us at PTQI
  Training and Development Centre(TDC) at : 4833771-5 Ext : 273 during regular working hours (7:30–2:30)
  Fax : 021 4833770
  Website / www.ptqi.edu.ly
  processing@ptqi.edu.ly